TSE Logo
THE POLYMER COMPANYTM

Millathane® - Superior Properties. Superior Performance.

 


Millathane® compounds can be made into dense, solid materials or sponge materials (foamed or blown). Dense compounds can have hardnesses from approximately 25 to 99 Shore A (60 Shore D), tensile strengths over 5,000 psi (35 MPa) and DIN abrasion values as low as 30-40 mm³ loss. Sponge compounds can be produced with densities as low as 0.4 g/cc. Millable urethane rubbers possess a combination of physical properties not found in natural or synthetic rubber such as:

  • Outstanding abrasion resistance
  • Excellent oil, oxygen and ozone resistance
  • Excellent gas (e.g., nitrogen) permeability resistance, especially with polyester grades
  • Low temperature flexibility
  • Dynamic load bearing ability
  • High resilience
  • Excellent resistance to compression set
  • Withstands temperatures up to 120° C

For more information about Millathane® and Thanecure® products, please contact: Lynn Zylka at (727) 540-1358 or contact Lynn here.