Millathane HT, a millable urethane rubber from TSE Industries, Inc

TSE Industries, Inc. Technology, Service, Experience™ 4370 112th Terrace N Clearwater, FL 33762 USA Ph 727-573-7676 or 800-237-7634 Fax 727-572-0487

ATM Replacement Parts Cast Urethane Rubber Grippers Rubber Extrusions Rubber Rollers Rapid Prototyping GLOB Mill Cleaner

Engineering Plastics Rapid Prototyping Physical Properties of Plastics List of Plastic Products UHMW PE Sheets

Areas of Expertise Development & Analytical Center TSE-EcoSpray® TSE-EcoWind® Toll Manufacturing

Millathane 26 Millathane E40 Millathane 66 Millathane 76 Millathane 97 Millathane 5004 Millathane CM Millathane E34 Millathane HT Thanecure Thanecure T9 Thanecure ZM

MILLATHANE® Engineering Properties Discussion Forum

President's Message Officers and Directors

Job Listings Benefits Submit Your Resume

Millathane^® HT

A High Temperature Resistant Polyester Millable Polyurethane

Download MSDS and data sheet
Millathane HT Formulations New!

MillathaneHT is a polyester, millable polyurethane which has the ability to withstand elevated temperatures. One typical shortcoming of polyurethanes in general is a loss of physical properties at temperatures over 180ºF (82ºC); Millathane HT has overcome this weakness.

MILLATHANE HT can withstand a continuous temperature of 250°F (121°C) and still retain the excellent physical properties of polyurethane.

MILLATHANE HT can be processed and cured by use of conventional rubber manufacturing
equipment and techniques to yield finished urethane rubber parts. Compounds prepared
from MILLATHANE HT can be vulcanized with either sulfur or organic peroxide based systems.

MILLATHANE HT has the following outstanding
characteristics:

Heat aging resistance
Low temperature flexibility
Abrasion resistance
Tear strength
Ozone and weathering resistance
Oil and fuel resistance
Processing ease
Steam curable (with protection)

Millathane HT Premilled contains 1.5 phr of a polycarbodiimide (Millstab™ P) as a stabilizer for improved hydrolysis resistance and heat aging properties.

TYPICAL POLYMER PROPERTIES
Chemical type	Polyester polyurethane
Color	Dark to light amber
Physical form	Solid bale or milled sheets
Odor	Faint, characteristic
Specific gravity	1.12
Mooney viscosity, ML(1+4)/100°C)	35 – 65
Storage stability	2 years under dry and cool conditions
Health hazard	None

TYPICAL PHYSICAL PROPERTIES
Hardness range	30 – 90 A
Tensile strength	Up to 4500 psi, (31 MPa)
Elongation	Good
Low temperature properties	-75ºF (-59ºC) brittle point
Heat aging resistance	Excellent to 250ºF (121ºC) continuous, 300ºF (149ºC) intermittent
Ozone and weathering resistance	Excellent
Oil & fuel resistance	Excellent
Abrasion resistance	Excellent
Tear strength	Excellent
Resilience	20 to 40%

Millathane® Home

Millathane Technical Info

Millathane Formulary

Millathane 26 NEW!

Millathane E40 NEW!

Download MSDS's, brochures and data sheets

*Millathane 5004 and Millathane CM were formerly known as Vibrathane 5004 and Adiprene CM. Adiprene® and Vibrathane® are registered trademarks of Chemtura Corp.

TSE Industries, Inc. is an ISO 9001 Certified company.